In theory, the blackheads are removed when you pull the strips off your face. However, the strips may not remove acne entirely because they can’t deep-clean your pores.
While there isn’t anything inherently harmful about store-bought pore strips, the sticky synthetic materials can have a drying effect. And if you use them regularly, they can become pricey.
As an alternative, you may consider making your own pore strips with natural ingredients you can find around the house. Read on to learn how DIY pore strips work, as well as how you can make them yourself.
Homemade pore strips are designed to work in a similar way to their store-bought counterparts. The purpose of pore strips in general is to unclog pores of excess dirt, oil, and dead skin cells. All three of these elements contribute to the development of blackheads.
While no clinical studies have been conducted on natural pore strips, research does support the skin-benefiting effects of some of the individual ingredients commonly used, including yogurt and honey.
Before getting started, it’s important to use DIY pore strips on a clean face. Washing your face beforehand not only removes surface oils and dirt from your skin, but it also helps to soften blackheads for easier removal.
You’ll also need to wash your face after using pore strips to remove any excess ingredients left behind.
Don’t use any of the following recipes if you’re allergic to ingredients in them. It’s also recommended that you do a patch test ahead of time to make sure you don’t have any adverse reactions.
Rub the following mixtures inside your elbow and wait for 24 to 48 hours. If you experience inflammation or redness, don’t use it.
The following are some of the most popular DIY pore strip recipes and how to make them.
Egg white pore strips
Although there may be risks associated with allergies and infection, egg whites are widely used in homemade face masks because of their purported exfoliating and astringent-like effects on the skin. When used in pore strips, egg whites may have the ability to help shed dead skin cells that are clogging your pores.
To create an egg white pore strip, you need egg whites and paper towels. Place egg whites in a bowl and tear a paper towel into thin strips, putting them in with the egg whites.
Once the egg whites have soaked through the strips, place them across the desired area of skin. Gently peel off once the paper towels harden or after about 20 minutes.
Pore strips with tape
This method relies on the sticky factor of tape to remove blackheads alone without the use of any other exfoliating or softening in ingredients.
To use, take off small strips of clear cellophane tape. Place them sticky-side-down on the desired area of treatment. Press firmly against your skin and wait several minutes before gently peeling off.
While cellophane tape could possibly remove surface dead skin cells, it’s unclear how effective this method is in removing clogged gunk in your pores. Don’t use masking, duct, industrial, or any other type of tape that could be harmful to your skin.
Pore strips with sugar and honey
Honey is known for having antiseptic qualities, while the rough texture of sugar creates a natural exfoliant. When combined, these two ingredients may create an effective pore strip.
First, heat equal parts honey and sugar together over a saucepan. Once completely combined, let the mixture cool for several minutes. Apply to the desired area of skin and allow to harden for at least 15 minutes. Gently peel the strip away and rinse your skin.
Pore strips with yogurt and gelatin
Yogurt is known for adding moisture to the skin while also calming inflammation, thanks to naturally occurring probiotics. Gelatin is used in this recipe to help create the “sticky” effect of store-bought pore strips.
This recipe combines equal parts of plain gelatin and plain dairy yogurt (about a tablespoon of each). You can also use milk instead of the yogurt, though the texture may be thinner.
Heat the ingredients together until completely combined, and then test it to make sure it’s warm but not hot. Once it’s ready, apply in a thin, even layer across your nose, chin, or forehead. Wait 15 minutes or until the mixture is completely hardened before peeling the strips off your face.
Use caution if you have sensitive skin, as the gelatin’s ability to adhere to the skin can cause irritation upon removal. Some people have also reported a painful removal experience. You may consider reserving this recipe for your nose or forehead only.
DIY vegan pore strips
It’s also possible to make vegan-friendly versions of the pore strip recipes above. For example, you can use dairy free yogurt without gelatin or almond milk combined with an alternative sticky substance such as agar. Gently remove once hardened.
While the ingredients above may help remove blackheads safely at home, there are certain household ingredients you should never use on your face. Avoid pore strip recipes that contain the following:
- Glue. The idea behind glue is to mimic the effects of tape or the sticky factor of traditional pore strips. However, glue is not intended for human skin, and it may cause your pores to become clogged even further. Avoid any form of glue when attempting blackhead removal.
- Toothpaste. This is a dated home remedy that’s sometimes used as a spot treatment for pimples. However, we now know that toothpaste is much too drying for the skin.
- Baking soda. Some “natural” acne treatment recipes use baking soda to help dry out blemishes and excess oils. The problem with baking soda is that it may be too drying. This can cause your sebaceous glands to produce even more oil, and it may lead to rashes and skin irritation.